Generators & Dynamos (Edexcel IGCSE Physics)

• The generator effect can be used to:
  • Generate a.c in an generator
  • Generate d.c in a dynamo

Alternator

• A simple alternator is a type of generator that converts mechanical energy to electrical energy in the form of alternating current

An alternator is a rotating coil in a magnetic field with slip rings

• A rectangular coil that is forced to spin in a uniform magnetic field
• The coil is connected to a centre-reading meter by metal brushes that press on two metal slip rings
  • The slip rings and brushes provide a continuous connection between the coil and the meter
• When the coil turns in one direction:
  • The pointer deflects first one way, then the opposite way, and then back again
  • This is because the coil cuts through the magnetic field lines and an alternating potential difference, and therefore current, is induced in the coil
• An alternating current may also be produced when a magnet rotates within a stationary coil
  • Both methods operate on the principle that p.d. is induced when a coil experiences a changing external magnetic field

• The induced potential difference and the current alternate because they repeatedly change direction

a.c output from an alternator - the current is both in the positive and negative region of the graph

Dynamos

• A dynamo in physics is the name for a a direct current generator
• A simple dynamo is the same as an alternator except that the dynamo has a split-ring commutator instead of two separate slip rings

A dynamo is a rotating coil in a magnetic field connected to a split ring commutator

• As the coil rotates, it cuts through the field lines
  • This induces a potential difference between the end of the coil

• The split ring commutator changes the connections between the coil and the brushes every half turn in order to keep the current leaving the dynamo in the same direction
  • This happens each time the coil is perpendicular to the magnetic field lines

• Therefore, the induced potential difference does not reverse its direction as it does in the alternator
• Instead, it varies from zero to a maximum value twice each cycle of rotation, and never changes polarity (positive to negative)
  • This means the current is always positive (or always negative)

D.C output from a dynamo - the current is only in the positive region of the graph