Separation Techniques (Edexcel IGCSE Chemistry (Modular))
Revision Note
Written by: Stewart Hird
Reviewed by: Lucy Kirkham
Simple distillation
Simple distillation is used to separate a liquid and soluble solid from a solution (e.g., water from a solution of salt water) or a pure liquid from a mixture of liquids
The solution is heated, and pure water evaporates producing a vapour which rises through the neck of the round bottomed flask
The vapour passes through the condenser, where it cools and condenses, turning into the pure liquid that is collected in a beaker
After all the water is evaporated from the solution, only the solid solute will be left behind
Simple distillation
Diagram showing the distillation of a mixture of salt and water
Examiner Tips and Tricks
If asked to draw or label a diagram of simple distillation, make sure that the water goes in at the bottom of the condenser near the collecting beaker, and comes out at the top near the column.
Fractional distillation
Fractional distillation is used to separate two or more liquids that are miscible with one another (e.g., ethanol and water from a mixture of the two)
The solution is heated to the temperature of the substance with the lowest boiling point
This substance will rise and evaporate first, and vapours will pass through a condenser, where they cool and condense, turning into a liquid that will be collected in a beaker
All of the substance is evaporated and collected, leaving behind the other components(s) of the mixture
For water and ethanol
Ethanol has a boiling point of 78 ºC and water of 100 ºC
The mixture is heated until it reaches 78 ºC, at which point the ethanol boils and distills out of the mixture and condenses into the beaker
When the temperature starts to increase to 100 ºC heating should be stopped. Water and ethanol are now separated
Fractional distillation apparatus
Fractional distillation of a mixture of ethanol and water
Filtration
Filtration is used to separate an undissolved solid from a mixture of the solid and a liquid / solution ( e.g., sand from a mixture of sand and water)
Centrifugation can also be used for this mixture
A piece of filter paper is placed in a filter funnel above a beaker
A mixture of insoluble solid and liquid is poured into the filter funnel
The filter paper will only allow small liquid particles to pass through as filtrate
Solid particles are too large to pass through the filter paper so will stay behind as a residue
The filtration process
Filtration of a mixture of sand and water
Crystallisation
Crystallisation is used to separate a dissolved solid from a solution, when the solid is much more soluble in hot solvent than in cold (e.g., copper sulphate from a solution of copper (II) sulphate in water)
The solution is heated, allowing the solvent to evaporate, leaving a saturated solution behind
Test if the solution is saturated by dipping a clean, dry, cold glass rod into the solution
If the solution is saturated, crystals will form on the glass rod
The saturated solution is allowed to cool slowly
Crystals begin to grow as solids will come out of solution due to decreasing solubility
The crystals are collected by filtering the solution, they are washed with cold distilled water to remove impurities and are then allowed to dry
The process of crystallisation
Diagram showing the process of crystallisation
Paper chromatography
Paper chromatography is used to separate substances that have different solubilities in a given solvent (e.g. different coloured inks that have been mixed to make black ink)
A pencil line is drawn on chromatography paper and spots of the sample are placed on it
Pencil is used for this as ink would run into the chromatogram along with the samples
The paper is then lowered into the solvent container
The pencil line must sit above the level of the solvent so the samples don´t wash into the solvent container
The solvent travels up the paper by capillary action, taking some of the coloured substances with it
Different substances have different solubilities so will travel at different rates
This causes the substances to separate
Those substances with higher solubility will travel further than the others
This will show the different components of the ink / dye
Analysis of the composition of ink using paper chromatography
Worked Example
Sodium chloride is a soluble solid.
Name the technique used to separate a soluble solid from a solution?
A | filtration |
B | simple distillation |
C | crystallisation |
D | chromatography |
Answer:
The correct answer is C
Soluble solids are separated by gently heating the solution until the solvent evaporates and the solid crystallises
Notice the question asks for the separation of the solid, not the liquid from the solution. If it asked for the liquid, B would be the correct answer
Examiner Tips and Tricks
Paper chromatography is the name given to the overall separation technique while a chromatogram is the name given to the visual output of a chromatography run. This is the piece of chromatography paper with the visibly separated components after the run has finished.
Last updated:
You've read 0 of your 5 free revision notes this week
Sign up now. It’s free!
Did this page help you?