A student investigates if lamps are brighter in a series circuit or a parallel circuit. He sets up two different circuits, A and B.
State which circuit will have the brightest lamps and explain why.
In your answer, include the variables that the student will need to control in this experiment.
Did this page help you?
A student builds two electrical circuits. Each circuit uses identical cells and identical fixed resistors.
Explain why circuit A has a lower total resistance than circuit B.
Another student investigates the resistance of a filament lamp.
ii)
Use the circuit symbols below. Each symbol can be used once, more than once, or not at all.
[2]
Did this page help you?
Energy is transferred at high voltages in the national grid.
This house is near to a transmission line.
Explain why radio waves may be produced by the transmission line.
Explain why it is more efficient to transfer energy at high voltages.
The transmission line has a power loss of 6.156 kW.
Its resistance is 15.39 Ω.
Calculate the current in the transmission line.
Current = ................................ A
Did this page help you?
A student takes voltage and current measurements for four resistors (A, B, C and D).
The table shows the results from this experiment.
| Resistor | Voltage (V) | Current (A) | Resistance (Ω) |
| A | 12.0 | 2.0 | |
| B | 6.0 | 1.5 | |
| C | 7.5 | 1.5 | |
| D | 8.0 | 2.0 |
Which two resistors have the same resistance value?
Use the results to show this.
Calculate the maximum resistance that can be made using all four resistors.
[4]
State how this graph can be used to calculate resistance at any specific value of current.
[2]
A voltmeter is used to measure the output voltages produced from the circuit.
The voltmeter is not connected to a circuit and not recording a voltage.
Name the type of error on the voltmeter and suggest how it should be dealt with.
Did this page help you?