Resistors in Series & Parallel (AQA GCSE Physics)

Revision Note

Test yourself
Katie M

Author

Katie M

Last updated

Did this video help you?

Resistors in Series

  • When two or more resistors are connected in series, the total resistance is equal to the sum of their individual resistances
  • For two resistors of resistance R1 and R2, the total resistance can be calculated using:

Resistors in series equation, downloadable AS & A Level Physics revision notes

  • Where R is the total resistance, in Ohms (Ω)
  • Increasing the number of resistors increases the overall resistance, as the charge now has more resistors to pass through

combined-resistance, IGCSE & GCSE Physics revision notes

Resistors connected in series

Worked example

The combined resistance R in the following series circuit is 60 Ω.What is the resistance value of R2?

A.     100 Ω               B.     30 Ω               C.     20 Ω               D.     40 Ω

ANSWER:  C

Step 1: Write down the equation for the combined resistance in series

R = R1 + R2 + R3

Step 2: Substitute the values for total resistance R and the other resistors

60 Ω = 30 Ω + R2 + 10 Ω

Step 3: Rearrange for R2

R2 = 60 Ω – 30 Ω – 10 Ω = 20 Ω

Resistors in Parallel

  • When two or more resistors are connected in parallel, the combined resistance decreases
  • In the below circuit, the combined resistance of the resistors R1 and R2 is less than if they were connected in series

resistors-parallel-igcse-and-gcse-physics-revision-notes

Resistors connected in parallel

  • This happens because each resistor creates an extra path along which the charge can flow
    • This allows more charge to flow overall
    • This leads to a smaller overall resistance

  • The advantages of this kind of circuit are:
    • The components can be individually controlled, using their own switches
    • If one component stops working the others will continue to function

Examiner Tip

Students often struggle to understand how adding resistors to a circuit can actually reduce resistance.

Take a simple series circuit with just a cell, some wires, and a 5 Ω resistor. You now want to add a 10 Ω resistor to that circuit. You have two options; you can add the 10 Ω resistor in series to the 5 Ω resistor or in parallel to it. 

If you add the 10 Ω resistor in series, then all of the electrons in the circuit have to flow through both resistors. That's why the resistances add together. The total resistance of the new circuit is 5 + 10 = 15 Ω.

If you add the 10 Ω resistor in parallel, then you are creating a new loop, which is a new path for the electrons to flow through. They either flow through the 5 Ω resistor or they flow through the 10 Ω resistor. Now, because of the extra loop, that extra path for the electrons, there is actually more charge flowing around the circuit than there was before that 10 Ω resistor was added. That means a higher current, which means an overall smaller resistance than the original 5 Ω circuit.

A fundamental concept to understand about circuits is that when you change anything in the circuit (current, p.d., resistance), then everything (current, p.d., resistance) changes as a result. 

You've read 0 of your 10 free revision notes

Unlock more, it's free!

Join the 100,000+ Students that ❤️ Save My Exams

the (exam) results speak for themselves:

Did this page help you?

Katie M

Author: Katie M

Expertise: Physics

Katie has always been passionate about the sciences, and completed a degree in Astrophysics at Sheffield University. She decided that she wanted to inspire other young people, so moved to Bristol to complete a PGCE in Secondary Science. She particularly loves creating fun and absorbing materials to help students achieve their exam potential.