Working with Statistical Diagrams | Edexcel GCSE Maths Revision Notes 2022

Reading & Interpreting Statistical Diagrams

How do I read and interpret statistical diagrams?

Rather than present you with a list of values (raw data), questions may present information using a statistical diagram
- Such diagrams may or may not be the ones that are already familiar
- Unfamiliar diagrams will be reasonably straightforward to read and interpret
  - you won't need any new skills for such diagrams
Reading and interpreting statistical diagrams requires gathering any required information from a diagram
- this enables meaningful statistics like the mean, median, mode, range and interquartile range to be calculated
- from these, conclusions about the data can be made
Important things to look for in diagrams include
- a key, and/or shading, that indicate what certain parts of the diagram mean
  - e.g. a (dual) bar-chart may show year 7 data in solid shading and year 8 data in striped shading
- information given through the labels on the axes
- key words on diagrams such as frequency
- anything unusual or unexpected mentioned in words, whether they come before or after a diagram
- anomalies (outliers)
You may also be asked to comment on a given statistical diagram
- this may be to point out something that could be misleading or incorrect
  - e.g. uneven gaps in axes values
  - e.g. a missing key

Worked example

The dual line chart below shows the number of books loaned from a library by male and female adults each day for a week.

cie-igcse-4-5-3-dual-bar-line-chart

Work out the mean number of books loaned per day by males during this particular week.

We need the number of books from the males (red line) for each of the five days and then find their mean.

$Mean = \frac{10 + 12 + 12 + 15 + 15}{5} = \frac{64}{5} = 12.8$

Mean number of books loaned per day by males is 12.8

Work out the median number of books loaned by women per day by females during this particular week.

We need the number of books from the females (blue line) for each of the five days.

12, 15, 12, 16, 12

To find the median, these will need to be put into ascending order, then the middle value found.

12, 12, $12$ , 15, 16

The median number of books loaned per day by females is 12

Determine whether the males or females had the greater range of books loaned per day during this particular week.

Using the lists/values from the parts a) and b) ...

$\begin{array}{rcl} Male range & = & 15 - 10 = 5 \\ Female range & = & 16 - 12 = 4 \end{array}$

The males had the greater range of books loaned per day
(5 compared to 4 so their range was 1 book higher)

Comparing Statistical Diagrams

What is meant by comparing statistical diagrams?

Some questions may present you with data as a diagram rather than as a list of values
You may then be asked to compare one diagram with another that represent different characteristics
- - e.g. one diagram/table may be for 'dogs' data, the other for 'cats'
    - so dogs and cats data/results can be compared;
  - e.g. one diagram/table may be taken at one point in time, the other at a later date
    - this would allow comparisons that may reveal a change (improvement) over time
When data is presented as a diagram, it may be an unfamiliar diagram that you have not seen elsewhere on the course
- in such cases the diagram will be explained in the question or through a key
- such diagrams tend to be straightforward and fairly easy to interpret and read

How do I compare statistical diagrams?

By commenting on differences or similarities using some of the following
- averages - mean, median and mode
- spread - range and interquartile range
- unusual data values (anomalies or outliers)
You should aim to make at least two pairs of comments when asked to compare data
- The first pair of comments should use an average - mean or median, rather than mode
  - a comparison of an average mentioning the numbers involved
    e.g. class A's median of 11 was higher than class B's median of 6
  - what that comparison means in the context of the question
    e.g. on average class A scored higher marks on the test than class B
- The second pair of comments should use a measure of spread - range or interquartile range
  - a comparison of a measure of spread mentioning the numbers involved
    e.g. class A's interquartile range of 5 was higher than class B's interquartile range of 3
  - what that comparison means in the context of the question
    e.g. the test scores in class A showed more variation than the scores in class B
The mode can be mentioned if appropriate - for example with non-numerical data
- the mode is a relatively simple average so there are not always many marks available for using it
Before doing any comparisons of data or diagrams you may have to calculate averages and spread
You may also be asked to suggest assumptions, or problems with the data that could affect the reliability of results and comparisons
- e.g. do we assume that the test class A and class B took were the same?
- e.g. were class A and class B of similar ability/age?
- It may be we cannot tell from the information given in the question
  - but they are considerations that would influence how valid comparisons are

Examiner Tip

When asked to compare data or diagrams consider how many marks are available
- aim to write something different for each mark
  - 1 mark is often be for comparing the numbers involved
  - 1 mark is often for explaining what that then means in the context of the question

Worked example

The diagram below shows the temperatures, measured in °C, for each day of one week in the summer in the UK.

cie-igcse-4-5-3-time-series-graph

Find

the modal temperature,

ii)

the mean temperature for the week,

iii)

the range of temperatures for the week.

The modal (mode) temperature is the temperate that occurred during the week more than any other. Look for the temperature that occurred on the most number of days. Notice this is not the same as the highest temperature.

The modal temperature is 9 °C

ii)

The mean needs calculating.

$\begin{array}{rcl} Mean & = & \frac{12 + 10 + 9 + 9 + 11 + 10 + 9}{7} \\ = & \frac{70}{7} = 10 \end{array}$

Mean temperature for the week is 10 °C

iii)

The range also needs working out.

$\begin{array}{rcl} Range & = & Hi - Lo \\ = & 12 - 9 \\ = & 3 \end{array}$

Range of temperature for the week is 3 °C

For a different week in the UK, the following data is available.

Mean temperature (°C)	Range of temperatures (°C)
11	2.5

Compare the temperatures for the two different weeks.

Two pairs of comments - first pair comparing the means, second pair comparing the range.

The mean in the second week (11 °C) was 1 °C higher than the mean in the first week (10 °C)
On average, the temperature in the second week was higher than in the first week

The range in the first week (3 °C) was 0.5 °C higher the range in the second week (2.5 °C)
The temperatures were more spread out in the first week

State one assumption that should be made about the two weeks' temperatures so that comparisons are valid.

Consider the information - or lack of - given in the question. We are told when the first weeks' temperatures were collected but are not told anything in this respect for the second week.

The two weeks' temperatures were recorded at a similar time of year
e.g. both in the spring, or both in the same month

Working with Statistical Diagrams (Edexcel GCSE Maths)

Revision Note

Reading & Interpreting Statistical Diagrams

How do I read and interpret statistical diagrams?

Worked example

Comparing Statistical Diagrams

What is meant by comparing statistical diagrams?

How do I compare statistical diagrams?

Examiner Tip

Worked example

You've read 0 of your 10 free revision notes

Unlock more, it's free!

Join the 100,000+ Students that ❤️ Save My Exams

Author: Paul