What is the equation for kinetic energy?
Ek = mgh
Ek =
Ek =
Ek = Fs
Did this page help you?
Syllabus Edition
First teaching 2023
First exams 2025
What is the equation for kinetic energy?
Ek = mgh
Ek =
Ek =
Ek = Fs
Did this page help you?
Which of the following statements about gravitational potential energy is correct?
If a mass falls it will lose gravitational potential energy
If a mass is lifted up it will lose gravitational potential energy
If a mass falls it gains gravitational potential energy
If a mass travels horizontally then gravitational potential energy is lost
Did this page help you?
Which of the following is the correct definition for elastic potential energy?
Elastic potential energy is a measure of how much a material can be stretched or compressed
Elastic potential energy is the maximum amount that can be stretched or compressed
Elastic potential energy is a measure of the stiffness of a material
Elastic potential energy is the energy stored within a material (e.g. in a spring) when it is stretched or compressed
Did this page help you?
Which feature of a force-extension graph represents the work done on a material under tensile stress?
Gradient
Area
y-intercept
x-intercept
Did this page help you?
What is a material with a high breaking stress described as?
Strong
Brittle
Ductile
Elastic
Did this page help you?
Which one of the following situations does not describe the work done on an object?
Lifting a bar above the head
Pushing a supermarket trolley across a car park
Walking up stairs
Holding a box at a height of 1.5 m above the floor
Did this page help you?
What are the correct units for power?
Joules
Watts
Newton meters
Newtons
Did this page help you?
Which row describes an energy transfer?
Elastically
Chemically
Gravitational Potentially
Electrically
Did this page help you?
What is another way of saying that energy is wasted?
Energy has been transferred
Energy has been dissipated
Energy has been conserved
Energy has been destroyed
Did this page help you?
Which is the correct equation for the efficiency of a system?
Efficiency =
Efficiency =
Efficiency =
Efficiency =
Did this page help you?
Engineers are able to compare fuels by unit to analyse efficiency when designing new cars.
Which of the rows below correctly match the units of specific energy and the energy density?
|
Specific Energy |
Energy Density |
A. |
J |
J |
B. |
Nm |
kg m−3 |
C. |
J kg−1 |
J m−3 |
D. |
kg m2 s−2 |
J kg m−3 |
Did this page help you?
Sankey diagrams are used to represent energy transfers.
Which Sankey diagram shows the most efficient lightbulb?
Did this page help you?
The Sankey diagram for a new toaster is being analysed in a laboratory.
What is the correct amount of energy supplied to the bread as heat?
60 J
40 J
100 J
0 J
Did this page help you?
Fuels can be compared per unit by analysing specific energy or energy density.
Which formula is correct for the density of a material?
density = specific energy × energy density
density = specific energy + energy density
Did this page help you?
A trampolinist bounces up and down on their trampoline.
Which row states the energy transformations that take place in the system when the trampolinist bounces down on the trampoline and back up again. Assume that air resistance is negligible.
Gravitational potential → elastic potential → kinetic → elastic potential → gravitational potential
Gravitational potential → kinetic → elastic potential → kinetic → gravitational potential
Kinetic → gravitational potential → elastic potential → gravitational potential → kinetic
Gravitational potential → kinetic → elastic potential → gravitational potential
Did this page help you?
An object falls from rest from a height h close to the surface of the Moon. The Moon has no atmosphere.
When the object has fallen to height above the surface, what is
3
Did this page help you?
A horizontal spring of spring constant k and negligible mass is compressed through a distance y from its equilibrium length. An object of mass m that moves on a frictionless surface is placed at the end of the spring. The spring is released at speed v and returns to its equilibrium length.
What is the value of y?
v
v
v
v
Did this page help you?
A student states three scenarios in which she thinks no work is done on an object.
Which of the above scenarios is / are correct?
I and II only
I and III only
II only
All three
Did this page help you?
The power generated by the nuclear reactions in the core of the reactor is 35 GW.
If the efficiency of the power station is 60%, how much power goes into producing wasted energy?
35 GW
21 GW
14 GW
18 GW
Did this page help you?
A particle is thrown vertically upwards with a velocity v. It travels up to the highest point at X h m above the ground and it falls back down through point Y at h m above the ground.
Assuming air resistance is negligible, what is v of the particle at point Y?
2
4
Did this page help you?
A student of mass 50 kg climbs a vertical ladder 4.0 m tall in a time of 8.0 s. What is the power developed by the student against gravity?
25 W
200 W
1000 W
250 W
Did this page help you?
The efficiency of an electric motor is 80 %. When lifting a body, the amount of energy wasted is . What is the useful work done by the motor?
4
0.8
0.4
Did this page help you?
A lift is operated by an electric motor. It moves between the 21st and the 5th floor at a constant speed. One main energy transformation during this journey is:
Electric energy → Gravitational potential energy
Gravitational potential energy → Kinetic energy
Electric energy → Thermal energy
Kinetic energy → Electric energy
Did this page help you?
An object of mass m rest on top of a spring with a spring constant k whose base is attached to the floor.
What is the energy stored by the spring?
Did this page help you?
Energy density is a property of a substance which is calculated by multiplying its specific energy with which quantity?
Volume
Mass
Volume × mass
Did this page help you?
The Sankey diagram shows the energy transformations in a laptop computer while a person is watching a film.
What is the efficiency of the laptop?
3 %
8 %
31 %
69 %
Did this page help you?
To exit an underground cave network, an electric winch is used to raise a lift containing the four cavers back to the surface.
Each caver has a mass of 50 kg and the lift has a mass of 340 kg. The winch raises the lift through a vertical height of 2 km in 3 minutes.
Assuming that the acceleration due to free-fall is 10 m s−2, what is the total power wasted by the winch when the motor is 75% efficient?
80 kW
20 kW
60 kW
10800 kW
Did this page help you?
A 4 kg mass is released from rest at a height of 5 m and falls to the ground pulling a 3 kg mass up the slope. The rough surface of the ramp provides a constant frictional force of 3 N.
Use the acceleration due to free fall g = 10 m s−2.
What speed will the 4 kg mass hit the ground?
m s−1
m s−1
m s−1
m s−1
Did this page help you?
A stone of mass m kg is dropped from a height of 15 m above the surface of a thick, oily liquid. The surface of the liquid is 2 m above the ground.
The resistive force acting on the stone as it falls through the liquid is equivalent to 3mg N. Assume the acceleration due to free fall g = 10 m s−2 and air resistance is negligible.
What is the speed of the stone when it has travelled x m through the liquid?
m s−1
10m(15 − 2x) m s−1
m s−1
m s−1
Did this page help you?
The diagram shows a pulley in a crane system. An elevator m1 is used to lift building materials. A counterbalance m2 is used in the system. g is the acceleration due to free fall.
What rate does the motor provide energy to the system when the elevator is rising at a steady speed v m s−1?
m1gv
gv(m1 − m2)
gv(m1 + m2)
Did this page help you?
A wire undergoes elastic deformation. The force-extension graph is shown below.
What is the work done on the wire to increase the extension from 4.0 to 5.0 cm?
0.09 J
0.25 J
2.0 J
0.010 J
Did this page help you?
The diagram shows the design of a water wheel which drives a generator to produce electrical energy. The flow rate of the water is 100 000 g s−1. The generator supplies a current of 10 A at a potential difference of 240 V. Assume the acceleration due to free fall is 10 m s−2.
Ignore any changes in the kinetic energy of the water. What is the efficiency of the system?
0.3 %
3 %
3.33 %
30 %
Did this page help you?
A bunjee jumper has 0.036 MJ of gravitational potential energy at the top of the jump. He is attached to an elastic rope that starts to stretch after half the time of his fall has elapsed. The table below shows values of his gravitational potential energy, GPE, his kinetic energy KE, and the elastic potential energy in the rope, EPE.
GPE / MJ |
EPE / MJ |
KE / MJ |
|
Top |
0.036 |
0 |
0 |
Bottom |
0 |
0.036 |
0 |
What are the possible values of gravitational potential, elastic potential and kinetic energy when the bungee jumper is a quarter of the time through his fall? Assume that no energy is lost through air resistance.
GPE / kJ |
EPE / kJ |
KE / kJ |
|
A. | 21 | 0 | 15 |
B. | 9 | 0 | 27 |
C. | 9 | 18 | 9 |
D. | 18 | 9 | 9 |
Did this page help you?
Two springs S1 and S2 hang vertically whilst being attached to a horizontal rod. A force is applied to the bottom of S1 and it extends by x with an elastic potential energy, E in the spring.
The same load is applied to the bottom of S2. The extension of S2 is one third of the extension of S1.
What is the equation for elastic potential energy in S2?
3E
9E
Did this page help you?
Water flows from a lake into a turbine that is a vertical distance of 90 m below the lake, as shown.
The mass flow rate of the water is 3000 kg min–1. The turbine has an efficiency of 60%. Acceleration due to free fall is 10 m s−2.
What is the output power of the turbine?
1.62 kW
27 kW
45 kW
2700 kW
Did this page help you?
What is the efficiency of a system whose Sankey diagram is shown below?
The Sankey diagram is drawn to scale.
10%
20%
30%
40%
Did this page help you?
A coal-fired power station with an efficiency ε burns fuel that has an energy density D and a specific energy S. The rate at which the mass of the fuel is consumed is M.
What is the power output of the power station?
ε × M × S
ε × D × M
Did this page help you?
An industrial estate of five factories is powered entirely by solar panels.
On an average day, one factory consumes 100 kWh of energy.
One solar panel has a surface area of 2.5 m2 and an efficiency of 25%. At this location, the average intensity of sunlight received is 8 kWh m−2 per day.
How many solar panels are needed to meet the energy demands of the industrial estate?
10
100
1000
10 000
Did this page help you?