Quantum Physics (HL IB Physics)

When monochromatic light is incident on a clean metal surface, photoelectrons may be emitted through the photoelectric effect.

Explain why, although the incident light is monochromatic, the kinetic energies of emitted photoelectrons vary up to some maximum.

Explain why no photoelectrons are emitted if the frequency of the incident light is less than a certain value, no matter how intense the light. 

For monochromatic light of wavelength 570 nm a stopping potential of 1.80 V is required for this particular metal surface. 

Determine the minimum energy required to emit a photoelectron from the metal surface. 

Monochromatic light is incident on a metal surface and electrons are emitted instantaneously from the surface. 

Explain why:

The wavelength of light incident in part (a) is 450 nm and the work function of the metal is 2.0 × 10^–19 J. 

Determine the maximum kinetic energy of an electron emitted from the metal surface. 

The light source used in part (b) is now incident on a different metal surface. Its frequency is varied, such that the kinetic energy of emitted electrons can be recorded.  

The graph shows how the maximum kinetic energy E_K of the ejected electrons varies with the frequency of incident light. 

Use the graph to determine a value for the Planck constant h. 

Use the graph in part (c) to determine the work function of the metal.

The diagram shows the end of an electron diffraction tube. 

A pattern forms when diffracted electrons are incident on a fluorescent layer at the end of the tube. 

Explain how the pattern demonstrates that electrons have wave properties.

A particle accelerator produces a beam of electrons of energy 55 keV.

Calculate the de Broglie wavelength of an electron in the beam.

Explain how the pattern in (a) changes with the momentum of the electrons.

The separation between the carbon atoms in graphite is about 0.15 nm.

Discuss whether the electrons in (b) could be used to demonstrate diffraction using a thin piece of graphite.

Photons are incident on a metal photocathode as shown in the diagram.

Two key observations are made:

• Electrons are emitted from the surface of the plate when an ultraviolet source of weak intensity is used.
• Electrons are not emitted at all when a lamp emitting high-intensity visible light is used.

Explain these observations.

Hydrogen atoms in the ultraviolet (UV) source make transitions from the first excited state to the ground state.

Calculate the energy, in eV, of photons emitted from the UV source.

The work function of the photocathode metal is 2.3 eV.

Calculate the maximum kinetic energy of electrons, in J, emitted from the surface of the metal.

Calculate the shortest de Broglie wavelength of the emitted electrons.

Ultraviolet light is incident on a zinc plate. The zinc plate is situated within an evacuated chamber a few millimetres under a collecting plate, as shown in the diagram.

Photoelectrons are emitted from the zinc plate and move towards the positive collecting plate due to the potential difference, V, between the plates. When the potential difference, V, is varied, it is observed that the photoelectric current varies as shown on the graph. 

The experiment is repeated by using a different ultraviolet lamp which has a lower intensity and wavelength. 

The work function of zinc is 3.74 eV. 

Determine the wavelength of the ultraviolet light incident on the zinc plate.

The diagram shows a single photomultiplier tube and its internal components. The tube can detect gamma photons in high-energy physics experiments.

A single gamma photon incident on the scintillator crystal generates many photons of blue light. These visible light photons travel to the photocathode where they are converted into photoelectrons.

The number of electrons is then multiplied in the photomultiplier tube with the help of electrodes called dynodes. A short pulse of electric current is produced at the output end of the photomultiplier tube.

A high energy gamma photon passing through the scintillator crystal converts some of its energy into visible light photons of mean wavelength 450 nm.

Show that the energy of a single photon of wavelength 450 nm is less than 3 eV.

The photocathode is coated with potassium which has a work function of 2.3 eV. Each emitted photoelectron is accelerated by a potential difference of 100 V between the photocathode and a metal plate, called the first dynode.

[1]

[3]

Electromagnetic radiation of constant wavelength is incident on a metal plate. Photoelectrons are emitted from the metal plate.

The diagram shows an arrangement used to determine the maximum kinetic energy of electrons emitted from a metal plate.

The metal plate and the electrode C are both in a vacuum. The electrode C is connected to the negative terminal of the variable power supply.

The graph shows the variation of current I  in the circuit as the potential difference V  between the metal plate and C is increased from 0 V to 3.0 V.

Explain why the current decreases as V  increases and describe how you can determine the maximum kinetic energy of the emitted electrons.

The concept of solar sails has been proposed as a means of propelling spacecraft around the Solar System. They would operate using the momentum of solar photons as they reflect from the gigantic low-mass sails.

At Earth, a parallel beam of light with wavelength 550 nm is incident normally on the surface of a solar sail.

Determine the rate of photons striking 1.0 m² of the surface every second.

Show that the force exerted by the reflection of photons on a 1.0 m² surface of the solar sail is about 9 × 10⁻⁶ N.

Assume that the Sun’s rays are normal to the sail and all the radiation is reflected.

A solar sail fixed to a spacecraft of mass 200 kg, with the full area of the sail facing the Sun, achieves an acceleration of 1.2 mm s⁻².

Determine the area of the solar sail.

The absorption and scattering of X-rays by matter can be used to investigate the structure and composition of a material. One of these scattering processes is known as Compton scattering.

In Compton scattering, an incident photon of frequency  collides elastically with a stationary electron. A scattered photon is produced with a frequency of and moves away at an angle of  to the direction of the incident photon.

The electron of mass  moves away with speed .

By considering the conservation of energy of the collision, show that

Both the photoelectric effect and the Compton effect demonstrate that light behaves as if it were composed of particles.

Discuss which phenomena provides the most convincing evidence of the particle nature of light.