ASPhysicsCIEExam Questions9. Electricity9.2 Potential Difference & Power

Syllabus Edition

First teaching 2023

First exams 2025

|

Potential Difference & Power (CIE AS Physics)

Exam Questions

1 hour23 questions

Select a question set to download for
9.2 Potential Difference & Power

Select an answer set to view for
9.2 Potential Difference & Power

Easy
Medium
Hard
1
Sme Calculator1 mark

What describes the electric potential difference between two points in a wire that carries a current?

  • the force required to move a unit positive charge between the points

  • the ratio of the energy dissipated between the points to the current

  • the ratio of the power dissipated between the points to the current

  • the ratio of the power dissipated between the points to the charge moved

Choose your answer

Did this page help you?

2
Sme Calculator1 mark

A filament lamp has a resistance of 180 Ω when the current in it is 500 mA.

 What is the power transformed in the lamp?

  • 45 W

  • 50 W

  • 90 W

  • 1400 W

Choose your answer

Did this page help you?

3
Sme Calculator1 mark

A 12 V battery is charged for 20 minutes by connecting it to a source of electromotive force (e.m.f.). The battery is supplied with 7.2 × 104 J of energy in this time.

 How much charge flows into the battery?

  • 5.0 C

  • 60 C

  • 100 C

  • 6000 C

Choose your answer

Did this page help you?

4
Sme Calculator1 mark

The diagram shows four heaters and the current in each.

 Which heater has the greatest power dissipation ?

cie-ial-physics-images-9-1-e-q8-

    Choose your answer

    Did this page help you?

    5
    Sme Calculator    1 mark

    What is the correct definition for potential difference?

    • Energy transferred per unit charge

    • Energy transferred per unit current

    • Power transfer per unit charge

    • Work done per unit current

    Choose your answer

    Did this page help you?

    1
    Sme Calculator    1 mark

    The diagrams show two different circuits.

    cie-ial-images428png

    The cells in each circuit have the same electromotive force and zero internal resistance. The three resistors each have the same resistance R.

     In the circuit on the left, the power dissipated in the resistor is P.

     What is the total power dissipated in the circuit on the right?

    • P over 4

    • P over 2

    • P

    • 2P

    Choose your answer

    Did this page help you?

    2
    Sme Calculator    1 mark

    The potential difference across a component in a circuit is 2.0 V.

    How many electrons must flow through this component in order for it to be supplied with 4.8 J of energy?

    • 2.6 × 1018

    • 1.5 × 1019

    • 3.0 × 1019

    • 6.0 × 1019

    Choose your answer

    Did this page help you?

    3
    Sme Calculator    1 mark

    Two lamps are connected in series to a 250V power supply. One lamp is rated 240V, 60W and the other is rated 10V, 2.5W.

     Which statement most accurately describes what happens ?

    • both lamps light at less than their normal brightness

    • both lamps light normally

    • only the 60 W lamp lights

    • the 10 V lamp blows

    Choose your answer

    Did this page help you?

    4
    Sme Calculator    1 mark

    A power cable X has resistance R and carries current I.

     A second cable Y has resistance 2R and carries current I over 2

     What is the ratio fraction numerator p o w e r space d i s s i p a t e d space i n space Y over denominator p o w e r space d i s s i p a t e d space i n space X end fraction  ?

    • 1 fourth

    • 1 half

    • 2

    • 4

    Choose your answer

    Did this page help you?

    5
    Sme Calculator    1 mark

    In a simple electrical circuit, the current in a resistor is measured as (2.50 ± 0.05) mA. The resistor is marked as having a value of 4.7Ω  ± 2 %.

     If these values were used to calculate the power dissipated in the resistor, what would be the percentage uncertainty in the value obtained?

    • 2 %

    • 4 %

    • 6 %

    • 8 %

    Choose your answer

    Did this page help you?

    6
    Sme Calculator    1 mark

    A battery, with a constant internal resistance, is connected to a resistor of resistance 250 Ω, as shown.

    cie-ial-images430png

    The current in the resistor is 40 mA for a time of 60 s. During this time 6.0 J of energy is lost in the internal resistance.

     What is the energy supplied to the external resistor during the 60 s and the e.m.f of the battery ?

     

    Energy / J

    E. m. f / V

    A

    B

    C

    D

    2.4

    2.4

    24

    24

    2.4

    7.5

    10.0

    12.5

      Choose your answer

      Did this page help you?

      7
      Sme Calculator      1 mark

      The charge that an electric battery can deliver is specified in ampere-hours.

       For example, a battery of capacity 40 ampere-hours could supply, when fully charged, 0.2 A for 200 hours.

       What is the maximum energy that a fully charged 12 V, 40 ampere-hour battery could supply ?

      • 1.7 kJ

      • 29 kJ

      • 1.7 MJ

      • 29 MJ

      Choose your answer

      Did this page help you?

      1
      Sme Calculator      1 mark

      The amount of energy transferred when 10 C of charge passes through a p. d. of 20 V is the same as the energy needed to raise a 2 kg mass through a distance x.

       Take gravitational field strength to be 10 N kg–1.

       What is the value of x?

      • 0.1 m

      • 1.0 m

      • 10 m

      • 100 m

      Choose your answer

      Did this page help you?

      2
      Sme Calculator      1 mark

      The ratings of two lamps are as follows:

       

      X

      230 V, 100 W

      Y

      230 V, 60 W

       

      During normal operation, which of the lamps will have larger current and resistance?

      • I subscript X greater than I subscript Y space a n d space R subscript X greater than R subscript Y

      • I subscript X greater than I subscript Y space a n d space R subscript X less than R subscript Y

      • I subscript X less than I subscript Y space a n d space R subscript X greater than R subscript Y

      • I subscript X less than I subscript Y space a n d space R subscript X less than R subscript Y

      Choose your answer

      Did this page help you?

      3
      Sme Calculator      1 mark

      Two lightbulbs, X and Y, are in parallel and are attached to a cell which has a potential difference of 75 V. Lightbulb X has a resistance of 350 Ω and Lightbulb Y has a resistance of 500 Ω. The power of Lightbulbs X and Y are PX and PY respectively.

      What is the value of the ratio P subscript X over P subscript Y?

      • 1 half

      • 7 over 10

      • 10 over 7

      • 2

      Choose your answer

      Did this page help you?

      4
      Sme Calculator      1 mark

      What is the effect on the current and power of a fixed resistor when the voltage through the resistor doubles?

       

      Current

       Power

      A.

      Quadruples

      Doubles

      B.

      Doubles

      Doubles

      C.

      Doubles

      Quadruples

      D.

      Halves

      Doubles

        Choose your answer

        Did this page help you?

        5
        Sme Calculator        1 mark

        Two resistors, X and Y, are in series with a cell that has a potential difference of V. The resistance of X and Y is R and R over 2 respectively.

        Given that the charge through both resistors is 6 C, what is the power and work done of Resistor X?

         

        Power

        Work done

        A.

        2V

        		 fraction numerator 8 V squared over denominator 9 R end fraction

        B.

        3V

        		 fraction numerator V squared over denominator 2 R end fraction

        C.

        4V

        fraction numerator 4 V squared over denominator 9 R end fraction 

        D.

        6V

        		 V squared over R

          Choose your answer

          Did this page help you?