A-Level Qualitative Analysis (Edexcel A Level Chemistry): Revision Note
Core Practical 15: Analysis of Inorganic and Organic Unknowns
Testing for positive ions
Simple test tube reactions can be done to identify the following positive ions: Group 2 ions (M2+) Ammonium ions (NH4+)
If the sample to be tested is a solid, then it must be dissolved in deionised water and made into an aqueous solution
Testing for Group 2 Metal ions Four test tubes should be placed in a test tube rack Around 10 drops of 0.1 mol dm-3 barium chloride solution should be added to the first test tube Around 10 drops of dilute sodium hydroxide solution (NaOH) should be added to the same test tube Swirl the test tube carefully to mix well Continue to add sodium hydroxide dropwise to the test tube, until it is in excess This should then be repeated in the other test tubes, for calcium chloride solution, magnesium chloride solution and strontium chloride solution Any observations should be noted down in a suitable results table The same test as above can also be done using ammonia solution and sulfuric acid solution
The Positive Results Testing for the Presence of Group 2 Ions
Testing for Ammonium Ions
About 10 drops of a solution containing ammonium ions, such as ammonium chloride, should be added to a clean test tube
About 10 drops of sodium hydroxide should be added using a pipette
The test tube should be swirled carefully to ensure that it is mixed well
The test tube of the solution should then be placed in a beaker of water, and the beaker of water should be placed above a Bunsen burner, so that it can become a water bath
As the solution is heated gently, fumes will be produced
A pair of tongs should be used to hold a damp piece of red litmus paper near the mouth of the test tube, to test the fumes
The red litmus paper will change colour and become blue in the presence of ammonia gas
Damp red litmus paper turning blue in the presence of ammonia gas
Testing for negative ions
Simple test tube reactions can be done to identify the following negative ions:
Halide ions (X–)
Hydroxide ions (OH–)
Carbonate ions (CO32-)
Sulfate ions (SO42-)
If the sample to be tested is a solid, then it must be dissolved in deionised water and made into an aqueous solution
Testing for Halide Ions
The sample being tested should be added using a pipette to a test tube
The test tube should be placed into a test tube rack
A small amount of nitric acid should be added to the sample using a pipette, followed by a small amount of silver nitrate solution
A precipitate will form, either white, cream or yellow, if a halide ion is present in the sample
The white, cream and yellow precipitates formed when halide ions react with silver nitrate solution
The white precipitate will form if chloride ions are present in the sample
The white precipitate is AgCl
The cream precipitate will form if bromide ions are present in the sample
The cream precipitate is AgBr
The yellow precipitate will form if iodide ions are present in the sample
The yellow precipitate is AgI
Further test for halides using ammonia solution
Results of the test with ammonia to further distinguish between silver halide precipitates
Testing for Hydroxide Ions
A small amount (around 1 cm3) of the solution should be added to a test tube using a pipette
Test the pH of the solution using red litmus paper or universal indicator paper
The presence of hydroxide ions will turn the red litmus paper blue and the pH will be clearly alkaline on the universal indicator paper if hydroxide ions are present
Testing for Carbonate Ions
A small amount (around 1 cm3) of dilute hydrochloric acid should be added to a test tube using a pipette
An equal amount of sodium carbonate solution should then be added to the test tube using a clean pipette
As soon as the sodium carbonate solution is added, a bung with a delivery tube should be attached to the test tube
The delivery tube should transfer the gas which is formed into a different test tube which contains a small amount of limewater (calcium hydroxide solution)
Carbonate ions will react with hydrogen ions from the acid to produce carbon dioxide gas
Carbon dioxide gas will turn the limewater milky
When carbon dioxide gas is bubbled into limewater it will turn cloudy as calcium carbonate is produced
Testing for Sulfate Ions
Acidify the sample with dilute hydrochloric acid and then add a few drops of aqueous barium chloride If a sulfate is present then a white precipitate of barium sulfate is formed:
Ba2+ (aq) + SO42- (aq) → BaSO4 (s)
A white precipitate of barium sulfate is a positive result for the presence of sulfate ions
Examiner Tips and Tricks
HCl is added first to remove any carbonates which may be present and would also produce a precipitate and interfere with the results.
Testing for alkenes / saturation
Halogens can be used to test if a molecule is unsaturated (i.e. contain a double bond)
Br2 is an orange or yellow solution, called bromine water
The unknown compound is shaken with the bromine water
If the compound is unsaturated, an addition reaction will take place and the coloured solution will decolourise
The bromine water test is the standard test for unsaturation in alkenes
Testing for alcohols
Acidified potassium dichromate(VI) (K2Cr2O7) test-tube reaction that can identify primary and secondary alcohols from tertiary alcohols
Acidified potassium manganate(VII) (KMnO4) can also be used
Positive Test Result:
Primary and secondary alcohols are oxidised to aldehydes and ketones respectively (which can be further tested)
Primary and secondary alcohols will change acidified potassium dichromate(VI) solution from orange to green
They will also cause a colour change from purple to colourless with acidified potassium manganate(VII) solution
The colour changes associated with testing for primary and secondary alcohols
Testing for carbonyls (general)
The carbonyl group undergoes a condensation reaction with 2,4-dinitrophenylhydrazine
Positive Test Result:
The product formed when 2,4-DNPH is added to a solution that contains an aldehyde or ketone is a deep-orange precipitate which can be purified by recrystallisation
The test tube on the left shows a negative 2,4-DNPH test and the tube on the right shows a positive test
The melting point of the formed precipitate can then be measured and compared to literature values to find out which specific aldehyde or ketone had reacted with 2,4-DNPH
Testing for Carbonyls (aldehyde / ketone specific)
Tollens' reagent, also known as ammoniacal silver nitrate, is a more specific test-tube reaction that can distinguish between aldehydes and ketones
Positive Test Result:
When Tollens' reagent is gently warmed with an aldehyde, the silver mirror is formed
This is the positive test result
When Tollens' reagent is gently warmed with a ketone, no silver mirror will be seen, as the ketone cannot be oxidised by Tollens' reagent, so no reaction takes place
This is a negative test result
The Ag+ ions in Tollens’ reagent are oxidising agents, oxidising the aldehyde to a carboxylic acid and getting reduced themselves to silver atoms
Fehling's solution (or Benedict's solution) is another specific test-tube reaction that can distinguish between aldehydes and ketones
Positive Test Result:
When Fehling's solution is gently warmed with an aldehyde, a brick-red precipitate is formed
This is the positive test result
When Fehling's solution is gently warmed with a ketone, no brick-red precipitate will be seen, as the ketone cannot be oxidised by Fehling's solution, so no reaction takes place
This is a negative test result
The copper(II) ions in Fehling’s solution are oxidising agents, oxidising the aldehyde to a carboxylic acid and getting reduced themselves to copper(I) ions in the Cu2O precipitate
Testing for carboxylic acids
Solid sodium carbonate, Na2CO3 (s), or aqueous sodium hydrogen carbonate, NaHCO3 (aq), can be used to test for the presence of a carboxylic acid
Positive Test Result:
Effervescence / bubbles of gas are seen as carbon dioxide is evolved
You've read 0 of your 5 free revision notes this week
Sign up now. It’s free!
Did this page help you?