Resolution & Magnification (AQA A Level Biology)
Revision Note
Written by: Lára Marie McIvor
Reviewed by: Lucy Kirkham
Resolution & Magnification
Magnification
Magnification is how many times bigger the image of a specimen observed is in compared to the actual (real-life) size of the specimen
A light microscope has two types of lens:
An eyepiece lens, which often has a magnification of x10
A series of (usually 3) objective lenses, each with a different magnification
To calculate the total magnification the magnification of the eyepiece lens and the objective lens are multiplied together:
eyepiece lens magnification x objective lens magnification = total magnification
Resolution
Resolution is the ability to distinguish between two separate points
If two separate points cannot be resolved, they will be observed as one point
The resolution of a light microscope is limited by the wavelength of light
As light passes through the specimen, it will be diffracted
The longer the wavelength of light, the more it is diffracted and the more that this diffraction will overlap as the points get closer together
Electron microscopes have a much higher resolution and magnification than a light microscope as electrons have a much smaller wavelength than visible light
This means that they can be much closer before the diffracted beams overlap
The concept of resolution is why the phospholipid bilayer structure of the cell membrane cannot be observed under a light microscope
The width of the phospholipid bilayer is about 10nm
The maximum resolution of a light microscope is 200nm (half the smallest wavelength of visible light, 400nm)
Any points that are separated by a distance less than 200nm (such as the 10nm phospholipid bilayer) cannot be resolved by a light microscope and therefore will not be distinguishable as “separate”
The resolving power of an electron microscope is much greater than that of the light microscope, as structures much smaller than the wavelength of light will interfere with a beam of electrons
Comparison of the electron microscope & light microscope
Light microscopes are used for specimens above 200 nm
Light microscopes shine light through the specimen, this light is then passed through an objective lens (which can be changed) and an eyepiece lens (x10) which magnify the specimen to give an image that can be seen by the naked eye
The specimens can be living (and therefore can be moving), or dead
Light microscopes are useful for looking at whole cells, small plant and animal organisms, tissues within organs such as in leaves or skin
Electron microscopes, both scanning and transmission, are used for specimens above 0.5 nm
Electron microscopes fire a beam of electrons at the specimen either a broad static beam (transmission) or a small beam that moves across the specimen (scanning)
The electrons are picked up by an electromagnetic lens which then shows the image
Due to the higher frequency of electron waves (a much shorter wavelength) compared to visible light, the magnification and resolution of an electron microscope is much better than a light microscope
Electron microscopes are useful for looking at organelles, viruses and DNA as well as looking at whole cells in more detail
Electron microscopy requires the specimen to be dead however this can provide a snapshot in time of what is occurring in a cell eg. DNA can be seen replicating and chromosome position within the stages of mitosis are visible
Light v Electron Microscope Table
Last updated:
You've read 0 of your 5 free revision notes this week
Sign up now. It’s free!
Did this page help you?